Tips And Techniques To Embroider On The Terry Cloth
January 2, 2018
5 Popular Fonts for Logos You Need to Know
5 Popular Logo Fonts You Need to Know
January 8, 2018
Show all

The Basics of Digitizing Small Lettering for a Logo Design

A logo needs to be designed with absolute precision and a perfect symmetry. However, maintaining this perfection in digitizing is easier said than done. If your logo digitizing project involves small letters, it gets more daunting to stitch readable text. However, you can attain proper alignment and accuracy by following the tips given here.

Consider the Size of Lettering:

Designing small text lettering is the most challenging part of logo digitizing. Irrespective of the number of alphabets, the text in a logo should be large enough to be legible and easily visible. Here, you can follow the thumb rule that says capital letters should be 4 mm in height. IF your logo combines small and capital letters, this height can be increased up to 5 mm. Secondly, you need to maintain the proper width of alphabets. It can be 0.8 to 1 mm to make the logo readable even from a distance.

Consider the Thread Thickness and Needles:

For custom embroidery digitizing of logo, you should use a thinner thread and smaller needle size. The smaller needle makes smaller lettering and the same goes for a thinner thread. The thickness of threads is often ascertained by the numbers assigned to them.

Use Low-Density Stitches:

There are some alphabets that have closed loops and they can overlap with other letters. Hence, you should use low-density stitches to leave ample spaces between the letters. The looped spaces need a radius of 0.45mm.

Consider the Fabric Density:

It requires experience and proper knowledge to determine the stitch density according to the fabric density. It isn’t wise to use high-density stitches for a low-density fabric and vice versa.

With expertise in digitized logo designing, the professional digitizers can ensure perfection even in small lettering.

 

 

Comments are closed.